Siêu Thị Máy Chủ » Supermicro system » 2U Rackmount » Socket 1366 (2way) Supermicro 2026T-6RF+ (Code Name: 2026T-6RF+)

Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s Up to 192GB DDR3 1333/1066MHz ECC Registered DIMM /48GB Unbuffered DIMM Left: (Full-height / Full-length) 2 (x8) PCI-E 2.0 Right: 1 (x4) PCI-E 2.0 (in x8 slot) LSI 2108 8-Port 6Gbps SAS Controller; RAID 0, 1, 5, 6, 10, 50, 60 Integrated IPMI 2.0 with KVM and Dedicated LAN Dual Intel® 82576 Gigabit Ethernet Controller 16x 2.5" Hot-swap SAS/SATA Drive Bays 920W Gold Level High-efficiency Redundant Power Supply

chỉ còn 0 VNĐ

Chi tiết

Product SKUs SYS-2026T-6RF+ SuperServer 2026T-6RF+ (Black) Motherboard Super X8DTU-6F+ Processor/Cache CPU * Dual 1366-pin LGA Sockets * Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: o Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W o Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W QPI up to 6.4 GT/s System Memory Memory Capacity * 18x 240-pin DIMM sockets * Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory * Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory * Memory Mirroring supported Memory Type * 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes * 1GB, 2GB, 4GB , 8GB , 16GB Memory Voltage * 1.5 V / 1.35V Error Detection * Corrects single-bit errors * Detects double-bit errors (using ECC memory) * Supports Intel® x4 and x8 Single Device Data Correction (SDDC) On-Board Devices Chipset * Intel® 5520 (Tylersburg) chipset * ICH10R SAS o LSI 6Gbps SAS 2108 w/ Hardware RAID support o RAID 0, 1, 5, 6, 10, 50, 60 support o BBU (battery backup) extension kit (optional) SATA * Intel ICH10R SATA 3.0Gbps Controller * RAID 0, 1, 5, 10 support IPMI * Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * Winbond® WPCM450 BMC Network Controllers * Intel® 82576 Dual-Port Gigabit Ethernet Controller * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output * Intel® I/OAT 3 support for fast, scaleable, and reliable networking * VMDq support for better performance of virtualization * 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200eW Super I/O Winbond 83827HF chip Input / Output Serial ATA * Six Serial ATA ports * Six SATA hard drives supported LAN * 2x RJ45 LAN ports * 1x RJ45 Dedicated IPMI LAN port USB * 2x USB rear ports * 1x USB on-board * 2x USB internal headers * Total 5 USB 2.0 Compliant VGA * 1x VGA Port Keyboard / Mouse * PS/2 keyboard and mouse ports Serial Port / Header * 1 Fast UART 16550 serial port * 1 Fast UART 16550 serial header (Option) Chassis Form Factor 2U Rackmount Model CSE-219A-R920UB Dimensions Height 3.5" (89mm) Width 17.2" (437mm) Depth 27.75" (705mm) Gross Weight 55 lbs (24.9kg) Available Colors Black Front Panel Buttons • Power On/Off button • System Reset button LEDs • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED Ports • 2x USB Ports Expansion Slots Left Slot • 2 (x8) PCI-E 2.0 slots Right Slot • 1 (x4) PCI-E 2.0 (in x8 slot -Low-Profile - 5.5" depth) Drive Bays Hot-swap • 16x 2.5" SAS / SATA Hot-swap drive trays Peripheral Drives DVD-ROM • Slim 8x DVD, 24x CD, DVD-ROM drive SAS/SATA Backplane 2U SAS / SATA Backplane System Cooling Fans • 3x 80mm 6300 RPM fans Shroud • 1x Air Shroud Power Supply with Power Distributor 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp DC Output • 4 Amp @ +5V standby • 75 Amp @ +12V With Power Distributor • +5V: 50 Amp • +3.3V: 30 Amp • -12V: 0.6 Amp Certification   80PLUS   Platinum Certified   [ Test Report ] PC Health Monitoring CPU • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. • 6-Phase-switching voltage regulator FAN • Total of eight fan headers supporting up to 8 fans • Eight 4-pin fan headers • 8x fans with tachometer status monitoring • Support 3-pin fans (w/o speed control) • Low noise fan speed control Temperature • Monitoring for CPU and chassis environment • Thermal Control for 8x fan connectors • PECI Other Features • Chassis intrusion detection • Chassis intrusion header Operating Environment / Compliance RoHS • RoHS Compliant Environmental Spec. • Operating Temperature: 10° to 35°C (50° to 95°F) • Non-operating Temperature: -40° to 70°C (-40° to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5 to 95% (non-condensing) STT Nhà cung cấp Liên hệ Tiền/Mua 1 Công Ty TNHH Siêu Siêu Nhỏ Địa chỉ chính: 254A Nguyễn Đình Chiểu - phường 6 - Quận 3 - Tp.Hồ Chí Minh Địa chỉ 1: 57 Láng Hạ - Thành Công Tower P. 1002, Ba Đình, HN   0 VNĐ Product SKUs SYS-2026T-6RF+ SuperServer 2026T-6RF+ (Black) Motherboard Super X8DTU-6F+ Processor/Cache CPU * Dual 1366-pin LGA Sockets * Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: o Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W o Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W QPI up to 6.4 GT/s System Memory Memory Capacity * 18x 240-pin DIMM sockets * Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory * Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory * Memory Mirroring supported Memory Type * 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes * 1GB, 2GB, 4GB , 8GB , 16GB Memory Voltage * 1.5 V / 1.35V Error Detection * Corrects single-bit errors * Detects double-bit errors (using ECC memory) * Supports Intel® x4 and x8 Single Device Data Correction (SDDC) On-Board Devices Chipset * Intel® 5520 (Tylersburg) chipset * ICH10R SAS o LSI 6Gbps SAS 2108 w/ Hardware RAID support o RAID 0, 1, 5, 6, 10, 50, 60 support o BBU (battery backup) extension kit (optional) SATA * Intel ICH10R SATA 3.0Gbps Controller * RAID 0, 1, 5, 10 support IPMI * Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * Winbond® WPCM450 BMC Network Controllers * Intel® 82576 Dual-Port Gigabit Ethernet Controller * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output * Intel® I/OAT 3 support for fast, scaleable, and reliable networking * VMDq support for better performance of virtualization * 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200eW Super I/O Winbond 83827HF chip Input / Output Serial ATA * Six Serial ATA ports * Six SATA hard drives supported LAN * 2x RJ45 LAN ports * 1x RJ45 Dedicated IPMI LAN port USB * 2x USB rear ports * 1x USB on-board * 2x USB internal headers * Total 5 USB 2.0 Compliant VGA * 1x VGA Port Keyboard / Mouse * PS/2 keyboard and mouse ports Serial Port / Header * 1 Fast UART 16550 serial port * 1 Fast UART 16550 serial header (Option) Chassis Form Factor 2U Rackmount Model CSE-219A-R920UB Dimensions Height 3.5" (89mm) Width 17.2" (437mm) Depth 27.75" (705mm) Gross Weight 55 lbs (24.9kg) Available Colors Black Front Panel Buttons • Power On/Off button • System Reset button LEDs • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED Ports • 2x USB Ports Expansion Slots Left Slot • 2 (x8) PCI-E 2.0 slots Right Slot • 1 (x4) PCI-E 2.0 (in x8 slot -Low-Profile - 5.5" depth) Drive Bays Hot-swap • 16x 2.5" SAS / SATA Hot-swap drive trays Peripheral Drives DVD-ROM • Slim 8x DVD, 24x CD, DVD-ROM drive SAS/SATA Backplane 2U SAS / SATA Backplane System Cooling Fans • 3x 80mm 6300 RPM fans Shroud • 1x Air Shroud Power Supply with Power Distributor 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp DC Output • 4 Amp @ +5V standby • 75 Amp @ +12V With Power Distributor • +5V: 50 Amp • +3.3V: 30 Amp • -12V: 0.6 Amp Certification   80PLUS   Platinum Certified   [ Test Report ] PC Health Monitoring CPU • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. • 6-Phase-switching voltage regulator FAN • Total of eight fan headers supporting up to 8 fans • Eight 4-pin fan headers • 8x fans with tachometer status monitoring • Support 3-pin fans (w/o speed control) • Low noise fan speed control Temperature • Monitoring for CPU and chassis environment • Thermal Control for 8x fan connectors • PECI Other Features • Chassis intrusion detection • Chassis intrusion header Operating Environment / Compliance RoHS • RoHS Compliant Environmental Spec. • Operating Temperature: 10° to 35°C (50° to 95°F) • Non-operating Temperature: -40° to 70°C (-40° to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5 to 95% (non-condensing)