Supermicro Processor Blade SBI-7426T-T3 Mã sản phẩm: SBI-7426T-T3
- Compatible 14-Blade Enclosure
- Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
- Intel® 5500 (Tylersburg) Chipset
- Up to 96GB VLP DDR3 1333/ 1066/ 800MHz ECC Registered DIMM
- Intel® 82576 Gigabit Ethernet Controller with Intel® I/OAT and VMDq
- 3 x 2.5" Hot-swap SATA Drive Trays
- Integrated IPMI2.0 w/ remote KVM and virtual media
- 4x DDR (20Gb/s) InfiniBand mezzanine HCA (Optional)
|
Product SKUs |
|
|
SBI-7426T-T3 |
Processor Blade SBI-7426T-T3 (Black) |
|
Motherboard |
|
|
Super B8DTE |
|
|
Processor/Cache |
|
|
CPU |
Dual 1366-pin LGA Sockets |
|
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: |
|
|
Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor) |
|
|
NOTE: Support processors with Max TDP < 100W |
|
|
QPI |
up to 6.4 GT/s |
|
System Memory |
|
|
Memory Capacity |
12x 240-pin DIMM sockets |
|
Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory |
|
|
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory |
|
|
Memory Mirroring supported |
|
|
Memory Type |
1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
DIMM Sizes |
1GB, 2GB, 4GB, 8GB |
|
Memory Voltage |
1.5 V and 1.35 V |
|
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
|
|
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
|
On-Board Devices |
|
|
Chipset |
Intel® 5500 (Tylersburg) chipset |
|
ICH10R + IOH-24D |
|
|
Infiniband Support |
|
|
SATA |
Intel ICH10R SATA 3.0Gbps Controller |
|
RAID 0, 1, 5, 10 support (Windows) |
|
|
RAID 0, 1, 10 support (Linux) |
|
|
IPMI |
Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM) |
|
Network Controllers |
Intel® 82576 Dual-Port Gigabit Ethernet |
|
Intel® I/OAT 3 support for fast, scaleable, and reliable networking |
|
|
VMDq support for better performance of virtualization |
|
|
Super I/O |
Winbond 83827HF chip |
|
Clock Generator |
CK505 chip |
|
System BIOS |
|
|
BIOS Type |
32Mb SPI Flash EEPROM with AMI® BIOS |
|
BIOS Features |
Plug and Play (PnP) |
|
PCI 2.2 |
|
|
ACPI up to 3.0 |
|
|
USB Keyboard support |
|
|
Dimensions |
|
|
Height |
11.32" (288 mm) |
|
Width |
1.19" (30.2 mm) |
|
Depth |
18.9" (480mm) |
|
Gross Weight |
8.6 lbs (3.9 kg) |
|
Available Colors |
Black |
|
Front Panel |
|
|
Buttons |
Power On/Off button |
|
KVM button |
|
|
LEDs |
Power LED |
|
UID / KVM LED |
|
|
Network Activity LED |
|
|
Fault LED |
|
|
Connector |
SUV (Serial/USB/Video) & KVM Connector |
|
Drive Bays |
|
|
Hot-swap |
3x 2.5" SATA Hot-swap drive bays |
|
Input / Output |
|
|
KVM |
1 Front Connector for Supermicro KVM Card |
|
Operating Environment / Compliance |
|
|
Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F) |
|
Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
|
