 |
|
 |
|
 |
|
 |
 |
3,680,500 VNĐ  |
4,438,250 VNĐ  |
3,312,450 VNĐ  |
5,217,650 VNĐ  |
5,282,600 VNĐ  |
|
|
 |
|
|
| |
 |
THÔNG TIN CHI TIẾT SẢN PHẨM |
 |
|
 |
|
|
 |
GPU Solution
Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
Up to 192GB DDR3 1333/1066MHz ECC Registered DIMM /48GB Unbuffered DIMM
4 (x16) PCI-E 2.0, 2 (x4) PCI-E 2.0 (in x16 slots), 1 (x4) PCI-E (in x8 slot), 2x PCI 33MHz slots
Intel® Dual 82573L Gigabit Ethernet Controller
8 x 3.5" Hot-swap Drives Trays; Supports up to 6 SATA Drives
1400W Gold Level Redundant Power Supply
Tower or Rackmount
4x Nvidia Fermi C2070 GPU Cards |
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
| SYS-7046GT-TRF-FC407 |
- SuperServer 7046GT-TRF-FC407 (Black)
|
| |
 |
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere)
- Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
| QPI |
|
| |
 |
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
 |
| GPU |
- 4x Nvidia Fermi C2070 GPU Cards
|
| Chipset |
- Dual Intel® 5520 (Tylersburg) chipset
- ICH10R
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| Network Controllers |
- Intel® Dual 82574L Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| Graphics |
|
| Super I/O |
|
| |
 |
| PCI-Express |
- 4 (x16) PCI-E 2.0 slots
- 2 (x4) PCI-E 2.0 (in x16 slots)
- 1 (x4) PCI-E (in x8 slot)
|
| PCI |
|
| |
 |
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN |
|
| USB |
- 4x USB rear ports
- 2x USB on-board
- 1x USB internal header - 2 ports
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
| |
 |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
 |
 |
 |
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model |
|
| |
 |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Package |
|
| Available Color |
|
| |
 |
| Buttons |
- LED Power On/Off button
- System Reset button
|
| LEDs |
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
| |
 |
| Hot-swap |
- 8x 3.5" Hot-swap SAS/SATA Drive Bays
- Supports up to 6 SATA Drives
|
| Peripheral Bay(s) |
- 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
|
| |
 |
| SAS / SATA Hard Drive Backplane with SES2 |
 |
| |
 |
| Fans |
- 4x 5000 RPM Hot-swap Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust Fan
|
| |
 |
| 1400W high-efficiency power supply with PMBus |
| AC Input |
- 1100W: 100 - 140V, 50 - 60Hz, 9.5 - 13.5 Amp
- 1400W: 180 - 240V, 50 - 60Hz, 7.0 - 9.5 Amp
|
DC Output +5V standby |
|
DC Output +12V |
- 92 Amp @ 100-140V
- 116 Amp @ 180-240V
|
| With Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| Certification |
 80 PLUS Gold Certified [ Test Report ] |
| |
 |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X8DTG-QF CSE-747TQ-R1400B |
1 1 |
Super X8DTG-QF Motherboard 4U Chassis |
| Add-On Card |
AOC-GPU-NVC2070 |
4 |
NVIDIA C2070 TESLA FREMI GPU/ACTIVE HS (w/ 6GB cache memory) |
| Backplane |
BPN-SAS-747TQ |
1 |
4u, SAS Backplane,x8 3.5\" HDD; SC747\'s |
| Cable 1 |
CBL-0061L |
6 |
35CM, SATA CABLE, PB FREE |
| Cable 2 |
CBL-0157L |
2 |
8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF |
| CD |
CDR-X8 |
1 |
For X8 series |
| Heatsink / Retention |
SNK-P0035AP4 |
2 |
4U+ ACTIVE CPU HS FOR SC733 AND SC735 |
| Power Distributor |
PDB-PT747-4648 |
1 |
POWER DISTRIBUTOR FOR SC747 W/ GRAPHIC OUTPUT FEATURE |
| Power Supply |
PWS-1K41P-1R |
2 |
1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3\" |
| Cable 3 |
CBL-0071L |
1 |
ROUND 16 TO 16 PIN RIBBON FP CABLE 30\" |
| Cable 4 |
CBL-0216L |
4 |
4 TO 4 PIN MIDDLE FAN POWER EXTENSION, 200MM (PWM) |
| Cable 5 |
CBL-0286L |
2 |
4 to 4 pin rear fan pwr ext w/ square header, 30cm (PWM) |
| Fan 1 |
FAN-0082L4 |
2 |
80x38 4 pin PWM fan assembly for SC743, 745 |
| Fan 2 |
Fan-0114L4 |
4 |
92x38mm 4-PIN PWM FAN W/ HUS for SC747 |
| Bezel Filter |
- |
1 |
Front Bezel Filter |
| Drive Tray(s) |
MCP-220-97301-0B |
8 |
Hot-swappable Hard Drive Tray |
| I/O Shield |
MCP-260-00025-0N |
1 |
I/O Shield |
|
|
 |
 |
 |
| |
Part Number |
Qty |
Description |
| Mounting Rails |
MCP-290-00059-0B |
- |
Chassis Mounting Rails |
|
|
|
|
|
 |
 |
 |
 |
 |
| SYS-7046GT-TRF-FC407 |
- SuperServer 7046GT-TRF-FC407 (Black)
|
| |
 |
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere)
- Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
| QPI |
|
| |
 |
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
 |
| GPU |
- 4x Nvidia Fermi C2070 GPU Cards
|
| Chipset |
- Dual Intel® 5520 (Tylersburg) chipset
- ICH10R
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| Network Controllers |
- Intel® Dual 82574L Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| Graphics |
|
| Super I/O |
|
| |
 |
| PCI-Express |
- 4 (x16) PCI-E 2.0 slots
- 2 (x4) PCI-E 2.0 (in x16 slots)
- 1 (x4) PCI-E (in x8 slot)
|
| PCI |
|
| |
 |
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN |
|
| USB |
- 4x USB rear ports
- 2x USB on-board
- 1x USB internal header - 2 ports
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
| |
 |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
 |
 |
 |
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model |
|
| |
 |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Package |
|
| Available Color |
|
| |
 |
| Buttons |
- LED Power On/Off button
- System Reset button
|
| LEDs |
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
| |
 |
| Hot-swap |
- 8x 3.5" Hot-swap SAS/SATA Drive Bays
- Supports up to 6 SATA Drives
|
| Peripheral Bay(s) |
- 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
|
| |
 |
| SAS / SATA Hard Drive Backplane with SES2 |
 |
| |
 |
| Fans |
- 4x 5000 RPM Hot-swap Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust Fan
|
| |
 |
| 1400W high-efficiency power supply with PMBus |
| AC Input |
- 1100W: 100 - 140V, 50 - 60Hz, 9.5 - 13.5 Amp
- 1400W: 180 - 240V, 50 - 60Hz, 7.0 - 9.5 Amp
|
DC Output +5V standby |
|
DC Output +12V |
- 92 Amp @ 100-140V
- 116 Amp @ 180-240V
|
| With Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| Certification |
 80 PLUS Gold Certified [ Test Report ] |
| |
 |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X8DTG-QF CSE-747TQ-R1400B |
1 1 |
Super X8DTG-QF Motherboard 4U Chassis |
| Add-On Card |
AOC-GPU-NVC2070 |
4 |
NVIDIA C2070 TESLA FREMI GPU/ACTIVE HS (w/ 6GB cache memory) |
| Backplane |
BPN-SAS-747TQ |
1 |
4u, SAS Backplane,x8 3.5\" HDD; SC747\'s |
| Cable 1 |
CBL-0061L |
6 |
35CM, SATA CABLE, PB FREE |
| Cable 2 |
CBL-0157L |
2 |
8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF |
| CD |
CDR-X8 |
1 |
For X8 series |
| Heatsink / Retention |
SNK-P0035AP4 |
2 |
4U+ ACTIVE CPU HS FOR SC733 AND SC735 |
| Power Distributor |
PDB-PT747-4648 |
1 |
POWER DISTRIBUTOR FOR SC747 W/ GRAPHIC OUTPUT FEATURE |
| Power Supply |
PWS-1K41P-1R |
2 |
1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3\" |
| Cable 3 |
CBL-0071L |
1 |
ROUND 16 TO 16 PIN RIBBON FP CABLE 30\" |
| Cable 4 |
CBL-0216L |
4 |
4 TO 4 PIN MIDDLE FAN POWER EXTENSION, 200MM (PWM) |
| Cable 5 |
CBL-0286L |
2 |
4 to 4 pin rear fan pwr ext w/ square header, 30cm (PWM) |
| Fan 1 |
FAN-0082L4 |
2 |
80x38 4 pin PWM fan assembly for SC743, 745 |
| Fan 2 |
Fan-0114L4 |
4 |
92x38mm 4-PIN PWM FAN W/ HUS for SC747 |
| Bezel Filter |
- |
1 |
Front Bezel Filter |
| Drive Tray(s) |
MCP-220-97301-0B |
8 |
Hot-swappable Hard Drive Tray |
| I/O Shield |
MCP-260-00025-0N |
1 |
I/O Shield |
|
|
 |
 |
 |
| |
Part Number |
Qty |
Description |
| Mounting Rails |
MCP-290-00059-0B |
- |
Chassis Mounting Rails |
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
| |
|
|
|
 |
14,070,000 VNĐ |
14,900,000 VNĐ |
16,320,000 VNĐ |
12,020,000 VNĐ | |
|
|
|