Siêu Thị Máy Chủ » Supermicro system » Tower / 4U » Socket 1366 (2way) Supermicro 6046T-TUF (Code Name: 6046T-TUF )

Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s Intel® 5520 (Tylersburg) Chipset Up to 192GB DDR3 1333/1066MHz ECC Registered DIMM /48GB Unbuffered DIMM 4 (x8) PCI-E 2.0, 1 (x4) PCI-E 2.0 and 1 (x4) PCI-E slot Dual Intel® 82574L GbE Controller 5x Hot-swap 3.5" SATA HDD; 3x 5.25" Peripheral bays; opt. Slim DVD drive 865W High-efficiency Power Supply Integrated IPMI 2.0 with Dedicated LAN

chỉ còn 0 VNĐ

Chi tiết

Product SKUs SYS-6046T-TUF SuperServer 6046T-TUF (Black)   Motherboard Super X8DTE-UF   Processor/Cache CPU Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon®Processor 5600 Series (Westmere) Intel® Xeon®Processor 5500 Series (Nehalem-EP) QPI up to 6.4 GT/s   System Memory Memory Capacity 12x 240-pin DIMM sockets Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB , 8GB , 16GB Memory Voltage 1.5 V / 1.35V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)   On-Board Devices Chipset Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D SATA Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC Network Controllers 2x Intel® 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200eW 16 MB DDR2 Super I/O Winbond 83827HF chip   Expansion Slots PCI-Express 4 (x8) PCI-E 2.0 slots 1 (x4) PCI-E 2.0 slot 1 (x4) PCI-E slot   Input / Output Serial ATA Six Serial ATA ports Six SATA hard drives supported Floppy 1 Floppy controller; 1.44 MB LAN 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port USB 4x USB rear ports 2x USB on-board (TypeA) 4x USB internal headers Total 8 USB 2.0 Compliant VGA 1x VGA Port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Port / Header 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (Option)   System BIOS BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS UEFI BIOS support UEFI Advantages No shadow ROM size limitation Faster to boot to OS No HDD size limitation for OS UEFI BIOs shell BIOS Features Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support Chassis Form Factor 4U Rackmountable / Tower Optional Rackmount Kit Model CSE-842TQ-865B   Dimensions Height 7.0" (178mm) Width 17.2" (437mm) Depth 20.5" (521mm) Gross Weight 35 lbs (15.9 kg) Available Colors Black   Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power Fail LED Ports 2x USB ports, 1x COM port   Drive Bays Hot-swap 5x 3.5" (8x 2.5" optional kits; SATA Hot-swap Drive Bays) Enterprise SATA HDD only recommended Peripheral Bay(s) 3x 5.25" Peripheral Drive Bays 1x Slim DVD-ROM (optional) Drive Bay   SAS / SATA Backplane SAS / SATA Hard Drive Backplane   System Cooling Fans (Tool-less) 1x Front Intake 9cm PWM cooling fan 2x Rear 8cm PWM cooling fans   Power Supply 865W AC power supply (cooling-redundant) w/ PFC AC Voltage 100 - 240V, 50-60Hz, 12-6 Amp +5V standby 6.5 Amp +12V 70 Amp +5V 30 Amp +3.3V 30 Amp -12V 1 Amp Certification   80 PLUS Certified   PC Health Monitoring CPU Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator FAN Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control Temperature Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI Other Features Chassis intrusion detection Chassis intrusion header   Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-X8DTE-UF CSE-842TQ-865B 1 1 Super X8DTE-UF Motherboard 4U Chassis Backplane BPN-SAS-842TQ 1 4U SC842 5x3.5inch Hotswap SAS/SATA with SES2 Cable 1 CBL-0044L 5 SATA CABLE 61CM FLAT S-S PBF Cable 2 CBL-0157L 1 8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF CD CDR-X8 1 For X8 series Power Supply PWS-865-PQ 1 865W PS2 POWER SUPPLY W/2 8CM FANS Cable 3 CBL-0084L 1 Front ctrl cable 16 pin split, 6\", PBF (with converter head) Cable 4 CBL-0087 1 Front ctrl cable ROUND 16 TO 16 PIN RIBBON 20\" Fan 1 FAN-0064L4 1 92X38MM 4-PIN PWM FAN W/ HUS FOR SC833/933 Fan 2 FAN-0082L4 2 80x38 4 pin PWM fan assembly for SC743, 745 Optional Parts List   Part Number Qty Description Fan Accessory MCP-320-84201-0N - Middle Fan Module Assembly for SC842 Front Bezel MCP-210-84201-0B - Black 4U Plastic Front Bezel Assembly for SC842 Heatsink SNK-P0035AP4 - 4U+ ACTIVE CPU HS FOR SC733 AND SC735 Mounting Rails MCP-290-00057-0N - Rail set, quick/quick, default for 4U 17.2"W Mounting Rails MCP-290-00058-0N - Short rail set, quick/quick, optional for 2~4U 17.2"W Parts MCP-420-84202-0N - Add-On Card Holder (7 Slots) for SC842 STT Nhà cung cấp Liên hệ Tiền/Mua 1 Công Ty TNHH Siêu Siêu Nhỏ Địa chỉ chính: 254A Nguyễn Đình Chiểu - phường 6 - Quận 3 - Tp.Hồ Chí Minh Địa chỉ 1: 57 Láng Hạ - Thành Công Tower P. 1002, Ba Đình, HN   0 VNĐ Product SKUs SYS-6046T-TUF SuperServer 6046T-TUF (Black)   Motherboard Super X8DTE-UF   Processor/Cache CPU Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon®Processor 5600 Series (Westmere) Intel® Xeon®Processor 5500 Series (Nehalem-EP) QPI up to 6.4 GT/s   System Memory Memory Capacity 12x 240-pin DIMM sockets Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB , 8GB , 16GB Memory Voltage 1.5 V / 1.35V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)   On-Board Devices Chipset Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D SATA Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC Network Controllers 2x Intel® 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200eW 16 MB DDR2 Super I/O Winbond 83827HF chip   Expansion Slots PCI-Express 4 (x8) PCI-E 2.0 slots 1 (x4) PCI-E 2.0 slot 1 (x4) PCI-E slot   Input / Output Serial ATA Six Serial ATA ports Six SATA hard drives supported Floppy 1 Floppy controller; 1.44 MB LAN 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port USB 4x USB rear ports 2x USB on-board (TypeA) 4x USB internal headers Total 8 USB 2.0 Compliant VGA 1x VGA Port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Port / Header 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (Option)   System BIOS BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS UEFI BIOS support UEFI Advantages No shadow ROM size limitation Faster to boot to OS No HDD size limitation for OS UEFI BIOs shell BIOS Features Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support Chassis Form Factor 4U Rackmountable / Tower Optional Rackmount Kit Model CSE-842TQ-865B   Dimensions Height 7.0" (178mm) Width 17.2" (437mm) Depth 20.5" (521mm) Gross Weight 35 lbs (15.9 kg) Available Colors Black   Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power Fail LED Ports 2x USB ports, 1x COM port   Drive Bays Hot-swap 5x 3.5" (8x 2.5" optional kits; SATA Hot-swap Drive Bays) Enterprise SATA HDD only recommended Peripheral Bay(s) 3x 5.25" Peripheral Drive Bays 1x Slim DVD-ROM (optional) Drive Bay   SAS / SATA Backplane SAS / SATA Hard Drive Backplane   System Cooling Fans (Tool-less) 1x Front Intake 9cm PWM cooling fan 2x Rear 8cm PWM cooling fans   Power Supply 865W AC power supply (cooling-redundant) w/ PFC AC Voltage 100 - 240V, 50-60Hz, 12-6 Amp +5V standby 6.5 Amp +12V 70 Amp +5V 30 Amp +3.3V 30 Amp -12V 1 Amp Certification   80 PLUS Certified   PC Health Monitoring CPU Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator FAN Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control Temperature Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI Other Features Chassis intrusion detection Chassis intrusion header   Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-X8DTE-UF CSE-842TQ-865B 1 1 Super X8DTE-UF Motherboard 4U Chassis Backplane BPN-SAS-842TQ 1 4U SC842 5x3.5inch Hotswap SAS/SATA with SES2 Cable 1 CBL-0044L 5 SATA CABLE 61CM FLAT S-S PBF Cable 2 CBL-0157L 1 8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF CD CDR-X8 1 For X8 series Power Supply PWS-865-PQ 1 865W PS2 POWER SUPPLY W/2 8CM FANS Cable 3 CBL-0084L 1 Front ctrl cable 16 pin split, 6\", PBF (with converter head) Cable 4 CBL-0087 1 Front ctrl cable ROUND 16 TO 16 PIN RIBBON 20\" Fan 1 FAN-0064L4 1 92X38MM 4-PIN PWM FAN W/ HUS FOR SC833/933 Fan 2 FAN-0082L4 2 80x38 4 pin PWM fan assembly for SC743, 745 Optional Parts List   Part Number Qty Description Fan Accessory MCP-320-84201-0N - Middle Fan Module Assembly for SC842 Front Bezel MCP-210-84201-0B - Black 4U Plastic Front Bezel Assembly for SC842 Heatsink SNK-P0035AP4 - 4U+ ACTIVE CPU HS FOR SC733 AND SC735 Mounting Rails MCP-290-00057-0N - Rail set, quick/quick, default for 4U 17.2"W Mounting Rails MCP-290-00058-0N - Short rail set, quick/quick, optional for 2~4U 17.2"W Parts MCP-420-84202-0N - Add-On Card Holder (7 Slots) for SC842