Supermicro 6026T-3RF Mã sản phẩm: 6026T-3RF
- Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
- Up to 192GB DDR3 1333/1066MHz ECC Registered DIMM /48GB Unbuffered DIMM
- 3 (x8) PCI-E 2.0 (1 in x16 slot), 1 (x4) PCI-E, 2x PCI 33MHz slots
- Integrated IPMI 2.0 with KVM and Dedicated LAN
- Dual Intel® 82576 Gigabit Ethernet Controller
- 8x Hot-swap SAS/SATA Drive Bays
- 720W Gold Level High-efficiency Redundant Power Supply
| Product SKUs | |
| SYS-6026T-3RF | SuperServer 6026T-3RF (Black) |
| Motherboard | |
| Super X8DT3-F | |
| Processor/Cache | |
| CPU | Dual 1366-pin LGA Sockets |
| Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: | |
| Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor) | |
| NOTE: Support processors with Max TDP < 100W | |
| QPI | up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | 12x 240-pin DIMM sockets |
| Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory | |
| Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory | |
| Memory Mirroring supported | |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | |
| Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | |
| On-Board Devices | |
| Chipset | Intel® 5520 (Tylersburg) chipset |
| ICH10R + IOH-36D | |
| SAS | LSI SAS1068E |
| RAID 0, 1, 10 support | |
| (Optional: AOC-IButton68) RAID 5 support | |
| SATA | Intel ICH10R SATA 3.0Gbps Controller |
| RAID 0, 1, 5, 10 support | |
| IPMI | * Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * Winbond® WPCM450 BMC |
| Network Controllers | * Intel® 82576 Dual-Port Gigabit Ethernet * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output * Intel® I/OAT 3 support for fast, scaleable, and reliable networking * VMDq support for better performance of virtualization * 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| Expansion Slots | |
| PCI-Express | 3 (x8) PCI-E 2.0 (1 in x16 slot) |
| 1 (x4) PCI-E slot | |
| PCI | 2x 33MHz PCI slots |
| Input / Output | |
| SAS | 8 SAS / SATA ports |
| Serial ATA | * Six Serial ATA ports * Six SATA hard drives supported |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | * 2x RJ45 LAN ports * 1x RJ45 Dedicated IPMI LAN port |
| USB | * 4x USB rear ports * 2x USB on-board * 4x USB internal headers * Total 8 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | * 1 Fast UART 16550 serial port * 1 Fast UART 16550 serial header (Option) |
| Chassis | |
| Form Factor | 2U Rackmount |
| Model | SC825TQ-R720LPB |
| Dimensions | |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648mm) |
| Gross Weight | 55 lbs (24.9kg) |
| Available Colors | Black |
| Front Panel | |
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED |
| Ports | 2x USB Ports |
| Drive Bays | |
| Hot-swap | 8x 3.5" SAS Hot-swap drive trays |
| Peripheral Drives | |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
| SAS / SATA Backplane | |
| 1x 2U SAS / SATA backplane | |
| System Cooling | |
| Fans | 3x 80mm 6300 RPM fans |
| Shroud | 1x Air Shroud |
| Power Supply with Power Distributor | |
| 720W (1+1) Redundant high-efficiency power supply with PMBus | |
| AC Input | 100-240 V, 50-60 Hz, 4-9 Amp |
| DC Output | * 3 Amp @ +5V standby * 59 Amp @ +12V |
| +5V | 45 Amp |
| -12V | 0.6 Amp |
| +3.3V | 24 Amp |
| Certification | 80 PLUS Gold Certified [ Test Report ] |
| System BIOS | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | * Plug and Play (PnP) * PCI 2.2 * ACPI up to 3.0 * USB Keyboard support |
| PC Health Monitoring | |
| CPU | * Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. * 6-Phase-switching voltage regulator |
| FAN | * Total of eight fan headers supporting up to 8 fans * Eight 4-pin fan headers * 8x fans with tachometer status monitoring * Support 3-pin fans (w/o speed control) * Low noise fan speed control |
| Temperature | * Monitoring for CPU and chassis environment * Thermal Control for 8x fan connectors * PECI |
| Other Features | * Chassis intrusion detection * Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | * Operating Temperature: 10°to 35°C (50°to 95°F) * Non-operating Temperature: -40°to 70°C (-40°to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5 to 95% (non-condensing) |
