CÔNG TY TNHH SIÊU SIÊU NHỎ

3ware 9650SE Features

• 8th-generation StorSwitch™ non-blocking switched architecture
  • On-board I/O RISC processor and RAID offload provides true hardware RAID
• SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives
• Bootable array support for greater fault tolerance of your OS
• Variable stripe size for performance tuning by application
• 64-bit LBA support (greater than 2TB volume)
• ATA pass-through mode support
• DDR2 533 memory with ECC protection
• 32 pooled DMA channels
• Complete configuration management suite
  • 3ware BIOS Manager 2 (3BM2) – easy to use BIOS configuration tool
  • 3ware Disk Manager 2 (3DM®2) – browser-based management tool
  • Command Line Interface (CLI) – scriptable configuration tool
• SNMP support
• SMTP support for email/pager notification
• ATA/6 and Out of band (OOB) staggered drive spin-up support
• Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN
• Battery Backup Unit (BBU) support (excluding 2-port model)
• Multiple logical unit sizes and RAID levels on one card
• Multiple card support within a system for large storage requirements
• Hot-swap and hot-spare support for data availability
• Dynamic sector repair for robust data protection
• S.M.A.R.T. disk drive monitoring for reliability
• Emergency Flash Recovery protects against failed firmware upgrade
• Drive activity LED support
• Online Capacity Expansion and RAID Level Migration
• Write journaling for improved performance and data protection against accidental drive removal
• Drive insertion and removal notification
• Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane)
• Chassis Control Unit for enclosure management via I2C
• RoHS compliant

Operating System Support

• Microsoft® Windows® 2003/XP/2000, Red Hat Linux, SuSE Linux, Fedora Linux, 2.4 Linux kernel, 2.6 Linux kernel, FreeBSD; 32/64-bit driver support for Windows, Linux and FreeBSD For complete OS listing, go to: www.lsi.com/channel/ChannelDownloads/

3ware 9650SE Specifications

• Low profile form factor (2, 4, 8-port configurations)
• PCI Express x4
• Serial ATA 2.6 Specification support
• BIOS PnP (plug and play) and BBS (BIOS boot specification) support
• Operating Temperature
  • Without BBU: 0°C to 50°C
  • With BBU: 10°C to 40°C
• Power Requirements: 18W maximum
• Dimensions
  • 9650SE-8LPML 7.30”L x 2.73”H (18.54cm L x 6.93cm H)